RLE 10K V.2.5.a - Manual (Page 14)

14 SeaHawk 10K User Guide 800.518.1519
2 Installation and Configuration
Figure 2.1 SeaHawk 10K Physical Inputs
2.3. Mount the SeaHawk 10K
The SeaHawk 10K can be mounted inside a panel or on a DIN rail. The device has two
adjustable orange clips on the bottom. Push the clips out to expose two screw holes that allow
the device to be mounted in a panel; push the clips in to mount it on a DIN rail.
Figure 2.2 Mount the SeaHawk 10K
AC/DC Power Connections (2)
and
EIA-485 Communications Ports (2)
Relay
Output
Sensing Cable
Connection
Termination
Jumper
SW1
Configure
Settings
SW2
Modbus
Configuration
EGND1
Earth Ground
for use with
AC Power