RGBLink VSP 9516S User Manual - Manual (Page 98)

6. System Setup and Operation
How to Set Up the Volume
VSP 9516S User Manual 98
How to Set up the Volume
In single image mode, the operations are as follows:
1. Push [MENU/EFFECT] to enter the menu items, turn the knob, choose
, push the knob to confirm, turn the knob and choose .
2. Turn the knob, and choose
―OFF‖, disable the mute function.
3.Turn the knob, choose , turn the knob to adjust the volume.
For example, turn the volume down to 20:
In PIP mode, first, choose IMAGE A or IMAGE B as audio input source,
specific steps are as follows:
MENU AUDIO AUDIO IN IMAGE A/IMAGE B, or push the
[IMAGE1/IMAGE2] button, choose IMAGE A or IMAGE B, then repeat the
step1 to 3 above.
>INPUT >>
OUTPUT >>
TRANSITION >>
AUDIO >>
*MUTE ON
VOLUME 50
AUDIO IN IMAGE A
HDMI INTERNAL
*MUTE OFF
VOLUME 50
AUDIO IN IMAGE A
HDMI INTERNAL
MUTE OFF
>VOLUME 20
AUDIO IN IMAGE A
HDMI INTERNAL