RGBLink VSP 9516S User Manual - Manual (Page 94)

6. System Setup and Operation
How to Realize the Screen Size Setting
VSP 9516S User Manual 94
How to Realize the Screen Size Setting
VSP 9516S supports the screen parameters to meet the requirement
where user want to switch between scale screen size and full display size
(like monitor). This is only enable for a single display window. Following is
an example of a screen size is1408 x 832.
Operator can defined the VSP 9516S output resolution from standard
output resolution list or customized the output resolution which is higher
than 1408 x 832. For this application 1440x900 is an example:
Push the [MENU/EFFECT] button to go into the menu items, turn the knob
and choose , push the knob to confirm, then turn the knob and
choose , push the knob and goes into the screen menus as
following:
H SIZE--Horizontal pixels, turn knob or use the digital button to input the
value1408.
V SIZE--Vertical pixels, turn knob or use the digital button to input the value
832.
H POS--Horizontal position, default value is 0, set the value as the way of H
SIZE and V SIZE.
V POS--Vertical position, default value is 0, set the value as the way of H
SIZE and V SIZE.
MODE-- Mode option, choose SCREEN SIZE.