beautypg.com

RGBLink VSP 9516S User Manual User Manual

Page 131

background image

VSP 9516S User Manual 131

3. Locate the Gigabit network board port 3, 4, 5 into the main board, tighten

the screws, as shown in Figure 3.

(Figure 3)

4. Close and install the processor again, see ―Assemble the VSP 9516S‖ in

Part 3.

Part 3: Assemble the VSP 9516S

Specific steps are as follows:

1. Secure the back panel with the screws.

2. Replace the top cover on the VSP 9516S.

3. Fasten it with the screw that were removed in ―Take Apart the VSP 9516S‖

part.

4. If need, reconnect all cables.