RGBLink VSP 9516S User Manual - Manual (Page 113)

6. System Setup and Operation
How to Load the Saved Parameter
VSP 9516S User Manual 113
How to Load the Saved Parameter
1. Push the [LOAD/PIP2] button, the button light is on, and enable the
LOAD function.
2. Turn the knob, and choose the position that will load, push the knob to
confirm.
User can also push the [MENU/EFFECT] button to enter to the menu
items, turn the knob to choose , and choose ―LOAD
FROM‖ to load the saved parameter.
3. Push the [LOAD/PIP2] button again, the button light if off, and disable
the LOAD function.
LOAD FROM
>SAVE 1
Button on is ready for recall
Button flashes means just recall