RGBLink VSP 9516S User Manual - Manual (Page 41)

4. Menu Orientation
MENU
VSP 9516S User Manual 41
V POS: Image vertical position.
CLOCK: Input signal clock.
PHASE: Input image phase.
Note
Only comments to professional operator.
AUTO ADJUST: Auto adjust VGA input signal H POS, V POS, CLOCK,
PHASE, auto adjust to display in full screen image.
Note
Comments customers to use this operation in
adjusting the VGA input shiftment.
ADC AUTO ADJUST: Brightness auto adjusting.
SDI ADJUST: When SDI input signal image shift, please adjust image ’s H
POS and V POS to display in full screen image.
Sub menu as follows:
H POS: Image horizontal position.
V POS: Image vertical position.
ANTI-ALIAS: If there is sawtooth when input SDI signal, user can do
anti-alias processing by modify STEP_1 to STEP_7, and different STEP
with different effects. System default STEP_1.
RESET: If image quality distorts by improper operation, it can be recover by
reset.
OUTPUT
Push the [MENU/EFFECT] button, OLED panel show menu, push the knob
to select , show menus as follows:
OUTPUT DETAIL: Display output signal information of DV1 and DV2,
including OUTPUT FORMAT, DVI MODE, BIT DEPTH, DATA RANGE, DE,