System setup and operation – RGBLink VSP 198CVS User Manual User Manual

Page 97

6. System Setup and Operation

How to Realize the Screen Size and Full Size Switching

VSP 198CVS User Manual 97

VSP 198CVS supports the screen parameters to meet the requirement

where user want to switch between scale screen size and full display size

(like monitor). This is only enable for a single display window. Following is

an example of a screen size is1408 x 832.

Operator can defined the VSP 198CVS output resolution from standard

output resolution list or customized the output resolution which is higher

than1408 x 832. For this application 1440x900 is an example:

Push the MENU button to go into the main menu, and turn knob goes to

, push knob and goes into the

PARAMETERS> menus as following:

H SIZE--Horizontal pixels, turn knob or use the digital button to input the

value1408.

V SIZE--Vertical pixels, turn knob or use the digital button to input the value

832.

H POS--Horizontal position, default value is 0, set the value as the way of H

SIZE and V SIZE.

V POS--Vertical position, default value is 0, set the value as the way of H

SIZE and V SIZE.

MODE-- Mode option, choose SCREEN SIZE.