RGBLink VSP 198CVS User Manual - Manual (Page 110)

6. System Setup and Operation
How to Save the Parameter
VSP 198CVS User Manual 110
How to Save the Parameter
Save user mode to the customer for different scene directly call, leave out
the edit operation inconvenience, VSP 198CVS provides ten save
preferences.
1. Push the MENU button, the button light is on, and enable the SAVE
function.
2. Turn the knob, and choose the position that will save, push the knob
to confirm.
3. The figure: 1, 2, 3, 4, 5, 6, 7, 8, 9, 0 down of the buttons means
SAVE1~10, user can push any button on to save. For example, save to
SAVE 2, push button 2, the OLED panel will show as follows after
saving.
4. Again push the MENU button, the button light is off, and disable the
SAVE function.
SAVE TO
—
>SAVE 1
Button is on can be saved
Button flashes will be overwrite
SAVE TO
—
>SAVE 2 FINISHED!
Button is on can be saved
Button flashes will be overwrite