RGBLink VSP 198CVS User Manual - Manual (Page 74)

5. Communication Software Guideline
Software Operation
VSP 198CVS User Manual 74
Device Schedule:
Users can set up VSP 198CVS to play the appointed input video
automatically in time and operation of single or dual channels, ratio place.
Users can setup up to 10 timing operation in the schedule.
For details, please refer to the instructions in the manual: How to Set up the
Playlist.
IP Address：
Users can set equipment IP, usually used under the condition of one
computer control or remote control several computers. It takes effect
immediately after users change IP through serial port; and when users
change IP through network, it takes effect after reopen the software.
Clock：
Users can set or adjust lower computer time through ‖clock‖.