RGBLink VSP 198CVS User Manual - Manual (Page 121)

VSP 198CVS User Manual 121
2. Communication Firmware Upgrade
Upgrade by copy the file, the form of the file is: .MCU, and upgrade steps are as follows:
(1) Connect the USB interface of VSP198CVS to the computer with a USB cable.
(2) Plug in the power cord, and make sure the device is in normal operation.
(3) Push MENU button, and enter [USB UPDATE] option, operation steps are:
MENUSYSTEMUSB UPDATASEL.
(4) Open the USB drive that plug into the computer, and delete the "firmware. bin" file in
the USB drive, then copy the MCU file of VSP198CVS to the USB drive, program
loading is complete after the file has been copied.
(5) Restart the device, and enter the menu to check if the version is right, factory reset is
completed.
Operation steps are: MENUSYSTEMSYSTEM INFOCOM.VERSION.
3. CORE Panel Upgrade
Upgrade by copy the file, the name of the file is: VIDEO.fvb, and upgrade steps are as
follows:
(1) Connect the USB interface of VSP 198CVS to the computer with a USB cable.