RGBLink VSP 198CVS User Manual - Manual (Page 95)

6. System Setup and Operation
How to Do Customized Output Resolution
VSP 198CVS User Manual 95
How to Do Customized Output Resolution
Push the MENU button to enter the menu items, turn knob and choose
[OUTPUT FORMAT], push knob to confirm and go into the output format
menus, OLED module show as following:
STANDARD--Standard resolution.
CUSTOMIZED--Used defined resolution setting.
Push knob and go into menu:
Turn knob on each digital position, and change the value of the digital by
the digital buttons on the front panel. For example, input 1536 as following:
After the digital, push Knob will add *, means before the * is the horizontal
size. Same operation for vertical size, for example input1536 as following:
After the digital, push the Knob will add @, means before the @ is the
vertical size, and after the @ is the refresh rate. Only digital 50 or digital 60
supports for the refresh rate. Use the digital buttons to finish the settings, .
For example to input refresh rate 60.
CUSTOMIZED
->1920×1080@60
CUSTOMIZED
*1536×
CUSTOMIZED
*1536×1536@