RGBLink VSP 198CVS User Manual - Manual (Page 31)

2. Hardware Orientation
VSP 198CVS Front Panel
VSP 198CVS User Manual 31
DVI input selection button, its LED light turns on, output will be switched to
this channel.
HDMI input selection button, its LED light turns on, output will be switched to
this channel.
SDI input selection button, its LED light turns on, output will be switched to
this channel.
Black button, its LED light turns on, default setting of the test pattern. Test
pattern can be set and selected from OLED menu, push the button again, to
disable pattern.
Function
PIP function button: Single image or dual image selection button. Push the
button, its LED light turns on, and PIP function is open. Push the button
again, its LED light turns off , and close the PIP function, change to single
image. OLED shows as follows:
For details, please refer to MENU PIP function and How to Set up the PIP
.
— >PIP ON
LAYOUT PIP L+T
SELECT IMAGE A
SWAP IMAGE OFF
DVI
7
HDMI
8
SDI
9
BLACK
0
PIP
1