Hardware orientation – RGBLink VSP 198CVS User Manual User Manual

Page 32

Hardware Orientation

VSP 198CVS Front Panel

VSP 198CVS User Manual 32

Split function button: push the button, its LED light turns on, split function is

open. OLED menu shows as follows:

Turn knob, choose SPLIT, and choose ON, OLED menu shows as follows:

For details, please refer to MENU

Note

Support seamless split with any input sources,

the best seamless split effect is by DVI or SDI

loop through out put. When other input signals to

be used for seamless split, need a signal

distributor support.

Note

SPLIT reuse function: PIP mode, SPLIT button is

select image A or image B.

Save button: push it to enter SAVE mode, turn the knob or push the number

button which light up to save.

Currently, it supports 10 saving modes from 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, which

means SAVE1~10.

The OLED menu will show finish after finish saving.

For details, please refer to MENU

—

>SPLIT OFF

—>SPLIT ON

H TOTAL ****

V TOTAL ****

H POS ****

SPLIT

SAVE