RGBLink VSP 198CVS User Manual - Manual (Page 94)

6. System Setup and Operation
How to Set up the Size and Position of the Single Image
VSP 198CVS User Manual 94
How to Set up the Size and Position of the
Single Image
Push the SCALE button, and enter the scale function menus, the OLED
module show as follows:
The lights of number button 0~9 turn on, user can adjust the following items
by knob or number buttons.
H SIZE: Width setting.
V SIZE: Height setting.
H POS: Horizontal phase setting.
V POS: Vertical phase setting.
RESET: If image quality distorts by improper operation, it can be recover by
factory reset.
— >
H SIZE
1920
V SIZE
1080
H POS
0
V POS
0
— >
RESET