How to load the saved parameter, How to load the, Saved parameter – RGBLink VSP 198CVS User Manual User Manual

Page 111: System setup and operation

6. System Setup and Operation

How to Load the Saved Parameter

VSP 198CVS User Manual 111

Save user mode to the customer for different scene directly call, leave out

the edit operation inconvenience, VSP 198CVS provides ten save

preferences.

1. Push the LOAD button, the button light is on, and enable the LOAD

function.

2. Turn the knob, and choose the position that will load, push the knob to

confirm.

3. Again push the LOAD button, the button light if off, and disable the

LOAD function.

RECALL SAVE
—

>SAVE 1

Button on is ready for recall

Button flashes means just recall