RGBLink VSP 198CVS User Manual - Manual (Page 46)

4. Menu Orientation
MENU
VSP 198CVS User Manual 46
ETHERNET: Network setting, including:
NETWORK ON/OFF: Can choose ―ON‖ or ―OFF‖.
IP ADDRESS: 192.168.000.100.
DISPLAY MODE:
MODE: Image mode selection, user can choose different output modes
according to their requirement, such as: black, video image, freeze image,
flat color and test pattern.
TEST PATTERN: Test pattern setting, rotate the knob, there are 66 kinds of
modes for choose.
FLAT COLOR: When the output mode is pure color image, choose
corresponding red, green and blue color value in this option to meet the
practical needs.
For details, please refer to the instructions in the manual: How to Realize
the Test Pattern Output and Settings.
DELAY CALL: Delay the output time setting. When more than one
equipment power on, and the processor is the end equipment in order to
improve question that can ’t identify the input signal and phenomenon that
LED screen appear messy code and flash screen, it need to delay the input
time among 1S to 255S.
TECH SUPPORT: Show the factory sales, after sales, factory address,
contact information, etc.
INPUT DETAIL：Show the input signal and input format.
OUTPUT DETAIL：Show the output signal information.
SYSTEM INFO: System information.
COM. VERSION: Information of COM version.
FIRMWARE VERSION: Information of firmware version.
SN: Serial number of VSP 198CVS.
IP: IP address.
DATE&TIME: Show or change the date or time.