beautypg.com

Communication firmware upgrade, Communication firemware upgrade – RGBLink VSP 1314 User Manual User Manual

Page 75

background image


VSP 1314 User Manual 75

Communication Firmware Upgrade

Shut the power device, switch the direction of arrow of the two dial switch

which download IP board to ON state. As shown in figure:

Connect one end of RJ11 download line to RS232 .control Connector of

video processor end access and the other end access PC serial port.

Double-click

,enter into the procedure Connector of Flash

Magic, setting in figure: First, users select the corresponding serial ports,

set baud rate as 115200, choosing device LPC2368 and loading target file

of 100 M IP board of the upgrade program. (hex. File) Then, confirm it

through choosing two

Finally, click ―start‖ button.