Hardware orientation – RGBLink VSP 1314 User Manual User Manual

Page 30

2.Hardware Orientation

VSP 1314 Front Panel

VSP 1314 User Manual 30

Detail please refer to

Press button

and light up green to enter to LOAD mode, at the

same time CV1/1, CV2/2, USB1/3, DVI1/4, VGA1/5, CV3/6, CV4/7,

USB2/8, DVI2/9, VGA 2/10 all of them light up green ,the figure of 1，2，3，

4，5，6，7，8，9，10under button is load save1~10，press arbitrary

button1~10 to load save.LCD will show Load From, after finish loading, the

button which selected will light out, and other 9 lights light up still. It means

can load other information .Press button again the green light light out it

means have exit Load mode.

LCD shows as following:

Detail please refer to

SCALE/CROP：SCALE and CROP setting muitiplexing button

Press button, light up green to enter to SCALE mode;

Press button, light up red to enter to CROP mode;

H SIZE/H POS：Height and vertical position setting muitiplexing button;

Press button, light up green to enter to height setting;

Press button, light up red to enter to vertical position setting;

V SIZE/V POS：Width and transverse position setting muitiplexing button;

Press button, light up green to enter to width setting;

Press button, light up red to enter to transverse position setting;

Load From:

Press<1~10>to Load