RGBLink VSP 1314 User Manual - Manual (Page 31)

2.Hardware Orientation
VSP 1314 Front Panel
VSP 1314 User Manual 31
Three key combination use as following:
SCALE：
Press SCALE/CROP，light up green to enter to Scale setting; At the same
time H SIZE\H POS light up green, rotate the adjust knob can adjust the
height of picture; Press H SIZE\H POS ,light up red to enter to light-vertical
position setting, rotate the adjust knob can adjust the position of vertical;
Press V SIZE/V POS ,light up green to enter to Width setting, rotate the
adjust knob, can adjust width of picture; Press V SIZE/V POS, light up red
to enter to transverse position setting, rotate the adjust knob can adjust the
position of transverse;
LCD shows as following:
CROP：
Press SCALE/CROP，light up red to enter to scale setting; At the same
time when H SIZE\H POS light up green to enter to height setting, rotate
the adjust knob can adjust the height percentage; Press H SIZE\H POS,
light up red to enter to vertical position setting, rotate the adjust knob, can
adjust the vertical percentage; Press V SIZE/V POS, light up green to enter
to width setting, rotate the adjust knob can adjust the width percentage;
Press V SIZE/V POS ,light up red to enter to transverse position setting,
rotate the adjust knob can adjust the transverse position percentage;
DVI2 Scale HSize <1024>
Scale HPos < 0>
Scale VSize < 768>
Scale VPos < 0>