RGBLink VSP 1314 User Manual - Manual (Page 63)

5.System Setup and Operation
How to splicing with DVI3
VSP 1314 User Manual 63
6. Press the adjust knob and rotate it to select Split Output Channel, press
to enter it. There are DVI1 and DVI2.Output channel can be set
separately;
7. Repeat the above operation step, can adjust the display range of DVI3
input source. That is scale a part image of DVI3 and display on output
port.
Split Switch： ON
Split Mode： H 1/2
Split Output Channel: DVI1
Display Width： 1024
Split Switch： ON
Split Mode： H 1/2
Split Output Channel: DVI1
Display Width： 1024
Split Switch： ON
Split Mode： H 1/2
Split Output Channel: DVI1
Display Width： 1024
Display Height： 768
Display Local X： 0
Display Local Y： 0
Screen Width： 1024
Display Height： 768
Display Local X： 0
Display Local Y： 0
Screen Width： 1024