RGBLink VSP 1314 User Manual - Manual (Page 27)

2.Hardware Orientation
VSP 1314 Front Panel
VSP 1314 User Manual 27
VSP 1314 Front Panel
Insert power cord and push power to ON position. LCD module on the front
panel will show RGBLINK and go into self verification before it load last
setting config and send processed image to the target monitor. For the first
setup, DVI input is default source. With front panel keyboard, user can
operate VSP 1314 through the menus on LCD panel.
VSP 1314 front panel as shown in figure:
When startup the system, it will enter to menu, and will refresh LCD module
menu display state automatically every 2 minutes. Display content are
input signal information and format, output format, etc on default settings.
CH1:DVI1 NO INPUT
CH2:DVI2 NO INPUT
3
1 A F V1 V2
Output: 1024X768 60Hz
AVDSP Series VSP 1314
Seamless Switcher & Scaler
System Initializing 100%