RGBLink VSP 1314 User Manual - Manual (Page 40)

4.Menu Orientation
MENU
VSP 1314 User Manual 40
When input signal to the large screen, boundary appear black side, can
use this function to adjust to make full screen display.
Select DVI1, rotate the adjust knob can choice the HDMI/DVI interface,
Default interface is DVI output. If you need HDMI output, please select
HDMI.
Select DVI1 also can choice color format, Color range of video format is
16-235, color range of image format is 0-255.
The same method can be applied to set the DVI2 output.
Screen setting: (Including above setting):
Screen Pos X：Horizontal coordinate setting;
Screen Pos Y：Vertical coordinate setting;
Screen Width：Width setting;
Screen Height：Height setting;
Window Mode: Can switch between Screen Full .
User can use USB1~USB4 to upgrade firmware.
Output ratio：Proportional setting menu:
Normal ；4：3 aspect ratio；16：9 aspect ratio，rotate the adjust knob can
switch between aspect ratio;
Image adjustment：
light upness：Can change the light upness of the image;
Contrast：Can change the color contrast of image;
Saturation：Can change the color temperature value of image;
Color Red ：Can change the red of image;
Color Green：Can change the green of image;
Color Blue：Can change the blue of image;
User can adjust and set according to actual condition. This function mainly
suitable for professional to operate image quality. Nonprofessional don ’t
recommend to operate above setting. If image quality were distortion
because of improper operation, can reply the factory setting.