RGBLink VSP 1314 User Manual - Manual (Page 43)

4.Menu Orientation
MENU
VSP 1314 User Manual 43
Authorized setting：This product have been using time limited by our
company, if it is service life and need to continue to use, you must to
contact with our sales or service to get the password.
State：Authorized and unauthorized；
MENU--- OLED Luminance
Enter can set the luminance of font；
MENU--- Video Firmware Update
User can update video firmware via USB1~USB4.
MENU--- Key Pad Lock
Enter can set whether key pad lock; If open it, operating other buttons are
invalid; release it, shall also press < Menu > and < Take > key to unlock!
This function mainly in order to prevent the user misoperation.
MENU---Factory Reset
Select it, press the knob to reset factory; It will show Factory Reset Finish if
success. As picture2;
EFFECT---EFFECT Switching
Press MENU/EFFECT to enter to EFFECT if light up red ; Press the adjust
knob can set EFFECT; There are: Fade in Fade out , CUT, Wipe Hard,
Wipe Soft Wipe Hard and Wipe Soft have 7 kinds of seamless switching
mode: Wipe Left、Wipe Right、Wipe Up、Wipe Down、Wipe Center Out、
Wipe Curtain Out、Wipe Plus Out；But only Wipe Soft has soft effect;
Cut :Cut Left、Cut Right、Cut Down、Cut Up、Cut Square、Cut Curtain、
Cut Center. It also supports the user defined switching speed; Adjustment
value range is ―0.5 s-30.0 s‖
Detail please refer to