RGBLink VSP 1314 User Manual - Manual (Page 25)

2.Hardware Orientation
VSP 1314 Rear Panel
VSP 1314 User Manual 25
11.RS232 Interface
Used to connect the computer.
OUTPUT Interface
12.13.22.23: Gigabit copper port
Gigabit copper port, connect to LED screen.
14.24：Power supply port of Sending Card
Power has been already supplied by video processor itself, don
’t need
external power supply.
15.25：USB control port of sending card
16.26：DVI Input
Input the DVI out originating from other video processors. （This DVI
connector does not support hot-plugging）
20：DVI Output
Connect to the monitor or LED screen which has DVI interface（This DVI
connector does not support hot-plugging）.
21：DVI +VGA-DVI Output
Connect to the monitor or LED screen which has DVI interface.（This DVI
connector does not support hot-plugging）.
DVI +VGA , VGA output connector can be connected to monitor or
projector which has VGA interface.
Note
Via adapter, can connect with
DVI-based or VGA-based equipment, and via，
DVI to VGA adapter, can output VGA
only.