RGBLink VSP 1314 User Manual - Manual (Page 39)

4.Menu Orientation
MENU
VSP 1314 User Manual 39
MENU---Input
Press MENU/EFFECT ,it light up green to enter to MENU and rotate the
adjust knob to select Input and press to make sure.LCD panel show the
information of input resolution and input matrix ;As picture above. If user
need to change input signal source ,rotate the adjust knob to select the
matrix, press knob can enter the corresponding channel setting; Channel 1
and Channel 2 can input 1 or input 2,Channel 3 can select test picture or
input DVI3.
MENU---Output
Press MENU/EFFECT，it light up green to enter to MENU, and rotate the
adjust knob to select the Output, press to make sure, now can set the
following options respectively, as picture 1:
Output resolution：Select this option user can select output resolution
according need, current support 12 kinds of resolution ,were as following:
1024x768_60Hz,1280x768_60 Hz,1280x720_60 Hz,1280x1024_60 Hz,
1366x768_60 Hz,1400x1050_60 Hz,1440x900_60 Hz, 1440x900_60_r Hz,
1600x1200_60 Hz,1680x1050_60 Hz,1920x1080_60 Hz,1920x1200_60
Hz.
Detail please refer to How to adjust output resolution .
Output currention：For DVI1 or DVI2 can set DE and can select coding
format of output signal(can select HDMI or DVI),And also can adjust color
range of video and image also can select the polarity of Horizontal and
vertical.
Select DE, press knob to set corresponding submenu, first of all to set DE
Setup switch; rotate the adjust knob to select ON ,then press the knob to
make sure and enter to DE setting, can up or down of menu:
DE H Start: Abscissa setting; DE V Start: Ordinate setting;
DE Width: Width setting; DE Height: Height setting;