RGBLink VSP 1314 User Manual - Manual (Page 57)

5.System Setup and Operation
How to select switching effect
VSP 1314 User Manual 57
How to select switching effect
Make sure equipment normal operation. Detail please refer to : How to
make equipment normal operation
Operation description:
TAKE is the effect switch button. The switching effect must be sett in menu.
After setting, press TAKE to switch.
Operation as following:
1.Press and button light up red; Rotate the
2. Adjust knob to select switch effect. There are 4 kinds of switch effect:
Cut、Fade in Fade out、Wipe soft、Wipe hard；
Effects
*Effects Mode:
Effects
*Effects Mode:
Display Time:<1.5S>
Effects
*Effects Mode:
Wipe Mode: < Wipe Left>
Wipe Speed: <8 S>
Effects
*Effects Mode:
Wipe Mode: < Wipe Left>
Wipe Speed: <8 S>