RGBLink VSP 112U - Manual (Page 98)

6. System Setup and Operation
How to Save the Parameter
VSP 112U User Manual 98
How to Save the Parameter
Save user mode to the customer for different scene directly call, leave out
the edit operation inconvenience, VSP 112U provides ten save
preferences.
1. Push the [SAVE] button, the button light is on, and enable the SAVE
function.
2. Turn the knob, and choose the position that will save, push the knob
to confirm.
3. The figure: 1, 2, 3, 4, 5, 6, 7, 8, 9, 0 down of the buttons means
SAVE1~10, user can also push any button to save. For example, save to
SAVE 2, push button 2, the OLED panel will show as follows after finish
saving.
4. Push the [MENU] button to disable the SAVE function.
SAVE TO
—
>SAVE 1
Button is on can be saved
Button flashes will be overwrite
SAVE TO
—
>SAVE 2 FINISHED!
Button is on can be saved
Button flashes will be overwrite