RGBLink VSP 112U - Manual (Page 107)

VSP 112U User Manual 107
C. Software Upgrade
The VSP 112U software upgrade steps are as follows:
1. Communication Firmware Upgrade
Upgrade by copy the file, the name of the file is: VSP112U_MCU_Vxxx.MCU, "xxx" is the
version number, the upgrade steps are as follows:
(1) Connect the USB interface of VSP 112U to the computer with a USB cable.
(2) Plug in the power cord, and make sure the device is in normal operation.
(3) Push MENU button, and enter [MCU UPGRADE] option, operation steps are:
MENUSYSTEMMCU UPGRADESEL.
(4) Open the USB drive that plug into the computer, and delete the "firmware. Bin" file in
the USB drive, then copy the MCU file "VSP112U_MCU_Vxxx.MCU" to the USB driver,
program loading is complete after the file has been copied.
(5) Restart the device, and enter the menu to check if the version is right, factory reset is
completed. Operation steps are: MENUSYSTEMSYSTEM INFO.
2. Image Processing Firmware Upgrade
Upgrade by windows control program, the name of the file is: bin.bin, and the upgrade
steps are as follows:
(1) Connect VSP 112U to the computer.
(2) Plug in the power cord.
(3) Open the windows control program, and set the serial, set baudrate as 115200.