RGBLink VSP 112U - Manual (Page 92)

6. System Setup and Operation
How to Realize the Screen Size Setting
VSP 112U User Manual 92
How to Realize the Screen Size Setting
VSP 112U supports the screen parameters to meet the requirement where
user want to switch between scale screen size and full display size (like
monitor). This is only enable for a single display window. Following is an
example of a screen size is1408 x 832.
Operator can defined the VSP 112U output resolution from standard output
resolution list or customized the output resolution which is higher than1408
x 832. For this application 1440x900 is an example:
Push the [MENU] button to go into the menu items, and turn the knob goes
to , push the knob and goes into the
menu as following:
H SIZE: Horizontal pixels, turn knob and use the digital button to input the
value1408.
V SIZE: Vertical pixels, turn knob and use the digital button to input the
value 832.
H POS: Horizontal position, default value is 0, set the value as the way H
SIZE and V SIZE.
V POS: Vertical position, default value is 0, set the value as the way H SIZE
and V SIZE.
MODE: Mode option, enable SCREEN SIZE.