Vsp 112u front panel, Hardware orientation – RGBLink VSP 112U User Manual

Page 30

3. Hardware Orientation

VSP 112U Front Panel

VSP 112U User Manual 30

Insert power cord and push power to ON position. OLED module on the

front panel will show RGBlink and go into its self verification before it load

last setting config and send processed image to the target monitor. For the

first setup, CV1 input is the default source. With front panel keyboard, user

can operate VSP 112U through the menus on OLED module.

VSP 112U front panel as shown in figure:

亮彩系列
AVDSP SERIES VSP 112U

INIT DEVICE
LOAD USER SETTINGS
60%