RGBLink VSP 112U - Manual (Page 47)

4. Menu Orientation
MENU
VSP 112U User Manual 47
SYSTEM
It can adjust the System function settings including as follows:
DISPLAY MODE:
MODE: Image mode selection, user can choose different output modes
according to their requirement, such as: black, video image, freeze image,
pure color and test pattern.
TEST PATTERN: Test pattern setting, rotate the knob, there are 66 kinds of
modes for choose.
PURE COLOR: When the output mode is pure color image, choose
corresponding red, green and blue color value in this option to meet the
practical needs.
For details please refer to the instructions in the manual: How to Realize
the Test Pattern Output and Settings.
DELAY CALL: Set delay the output time. When more than one equipment
power on, and the processor is the end equipment in order to improve
question that can ’t identify the input signal and phenomenon that LED
screen appear messy code and flash screen, now need to delay the input
time0~255S.
INPUT DETAIL: Can view information of input signal sources.
OUTPUT DETAIL: Can view information about display output signal.
SYSTEM INFO: System information, including:
COM. VERSION: Information of COM. version.
FIRMWARE VERSION: Information of FIRMWARE version.
USB SOFTWARE VERSION: Information of USB software version.
SN: Serial number of VSP 112U.
DATE&TIME: Display date and time, user can also change the date and
time.
WORK TIME: Display the current time, last time, total time and boot times.
OLED LUMINANCE: Adjust OLED panel luminance, the adjustment