RGBLink VSP 112U - Manual (Page 43)

4. Menu Orientation
MENU
VSP 112U User Manual 43
RESET: If image quality distorts by improper operation, it can be recover by
reset.
Image quality settings:
ADC ADJUST:
Mainly for the BRIGHTNESS auto adjusting.
GAMMA: Gamma setting, push it to adjust the image gamma value.
Gamma values include: LINEAR, sRGB, -1.2, -1.4, -1.6, 1.2, 1.4, 1.6.
ASPECT RATIO: Change the value to convert the aspect ratio for different
wide and height ratio settings.
Normal: Original video ratio 4:3 aspect ratios, 16:9 aspect ratios.
OUTPUT ADJUST: Output adjust menu, the sub-menu as following:
DVI1, setting as following:
DVI MODE: Can set the protocol as HDMI or DVI, default is DVI output,
HDMI signal output will enable when HDMI option checked.
DATE RANGE: DVI1 output range, can set as RGB (graphic mode or
YCbCr (video mode), RGB output scale range is between 0-255, YCbCr
range from 16 to 235.
DE ADJUST: DE adjust, the sub-menu as following:
DE ON/OFF: Can choose to open or close, when choose open, it can be
adjusted to DE, as follows:
H SIZE: Width setting.
V SIZE: Height setting.
H POS: Horizontal phase setting.
V POS: Vertical phase setting.
When the signal source of the screen appear black side, can use this
function to shift the black out of the screen.
RESET: If image quality distorts by improper operation, it can be recover by
reset.
DVI2: Including DVI MODE, DATA RANGE, DE ADJUST, and RESET,