RGBLink VSP 112U - Manual (Page 32)

2. Hardware Orientation
VSP 112U Front Panel
VSP 112U User Manual 32
ESC reuse function button. Push the [MENU] button to exit the menu.
Effect switch function button. Push the [MENU] button two times to enter the
effect switch function menu.
For details, please refer to: Special Effect Switching .
Save button: Push it to enter SAVE mode, turn the knob to select save position
or push the user mode buttons which light up from 0~9 directly.
Currently, it supports 10 saving modes from 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, which
means SAVE1~10. The OLED menu will show Finish after finish saving.
For details, please refer to MENU SAVE Function and How to Save the
Parameter.
LOAD button: Push it to enter LOAD mode, turn the knob or push the number
button which light up to load the saved parameters.
Currently, it supports 10 loading modes from 1, 2, 3, 4, 5, 6, 7, 8, 9, 0 means
LOAD user mode 1~10. The OLED menu will show Finish after finish loading.
For details please refer to MENU LOAD Function and How to Load the Saved
Parameter.
When input USB signal, push the button, the video or image will stop or play.
If input other signals, push the button, its LED light lights, and the current
image is freeze. Push the button again, its LED light is off, and exit freeze
Function.
Move previous button, push the button to play the previous USB video file.