RGBLink VSP 112U - Manual (Page 87)

6. System Setup and Operation
How to Realize Single Image Switching
VSP 112U User Manual 87
How to Realize Single Image Switching
Boot the system default CV1 to the current input source, if need seamless
switching other source such as DVI, push DVI key, OLED module display
as follows:
CV1 button light turns off after pushing DVI button. DVI button light is on if
the DVI signal is effective and stable. And if the DVI signal is invalid or no
input, DVI button light will flash.
Note
Seamless switch: means signal switch will not
appear any flash point, black, shaking or delay.
SOURCE SELECT:
>DVI SOURCE SELECT：
->DVI