RGBLink VSP 112U - Manual (Page 89)

6. System Setup and Operation
How to Do Customized Output Resolution
VSP 112U User Manual 89
How to Do Customized Output Resolution
Push the [MENU] button to enter the menu items, turn the knob and go to
, push the knob and confirm to go into the
FORMAT> menu, as following:
STANDARD--Standard resolution.
CUSTOMIZED--Used defined resolution setting.
Push the knob and go into menu:
Turn the knob on each digital position, and change the value of the digital
by the digital buttons on the front panel. For example, input 1536 as
following:
After the digital push knob will add ×, means before × is the horizontal size.
Same operation for vertical size, for example input1536 as following:
After the digital, push the knob will add @, means before the @ is the
vertical size, and after the @ is the refresh rate. Only digital 50 or digital 60
supports for the refresh rate. Use the digital buttons to finish the settings,
For example, input refresh rate 60.
CUSTOMIZED
->1920×1080@60
CUSTOMIZED
*1536×
CUSTOMIZED
*1536×1536@