REMKO GPM User Manual

Page 15

Operation and programming
of the electronic temperature
regulation ATR-6

Operating mode
With normal operating conditions
the following information appears
on the display of the electronic
temperature regulation:
· Date, hour and minutes
· Room temperature
· The heater symbol (HTG mode)
· The output with the

programming timer (for the HTG
- AUT mode, if programmed)

· The symbol  with the keys K+

and K-

Selection of the menu pages
If the electronic temperature
regulation is set to operation, you
arrive at the pages of the menu by
pressing the key KM.
On page 1 the following options
are possible:

HTG SAN

INFO >>

With key K4 (>>) you arrive at
page 2 of the menu, where the
the following options are possible:

PROG REG

TIME >>

With key K4 (>>) you go from
page 1 to page 2 and vice versa.

Setting the language
When the electronic temperature
regulation is switched on for the
first time you arrive at the menu
for selection of the user language.
The display shows:· DEUTSCH
OK
If the displayed language is the
desired language, press key K4
(OK) for confirmation.
For selection of another language,
actuate the keys K+ or K- and then
confirm the selection with the key
K4 (OK).

Changing the user language
To change the user language, press
and hold KM for approx.
8-10 seconds until the following
appears on the display:

INFO REG

ERR

Press K4 (>>) and then K1 (LANG).

Select the desired language with
the keys K+ and K-.
Press K4 (OK) for confirmation.
Return to operation mode.
Operation takes place
automatically after a few seconds
or
by pressing the key KM.

Setting the time and day

Programming of day and time
(TIME)
With the key KM and then button
K4 (>>) you arrive at page 2 of
the menu. With key K3 (TIME) the
menu for programming day and
time (TIME) is selected.
After selection of the menu,
choose one of the following
options:
DAY

MIN

Programming of the day - DAY
Press K1 (DAY); with the keys K+
or K- the current day of the
week is set.
The days of the week flash
consecutively on the display: from
- SU Sunday to SA Saturday

Programming the hours - HR
By pressing the key K2 (HR), you
arrive at the programming for the
hour.
The current hour is adjusted by the
keys K+ or K-.

Programming the minutes - MIN
By pressing the key K3 (MIN), you
arrive at the programming for the
minutes.
The current minute is adjusted by
the keys K+ or K-.

The return to operation
automatically takes place after a
few seconds or by pressing the key
KM.

Do not use sharp objects like
pens or pencils for actuation
of the keys; they could be
damaged.

ATTENTION

K+ key

K– key

K3-key

K1-key

Day

Hour

Error

Temperature

Operation-OFF

Heating

Burner-ON

Histogram clock

Text display

K4-key

K2-key

KM-key