Quantum Composers 9200 Series - Manual (Page 7)

9200 Manual Version 1.6 | Quantum Composers Page 7
3. Front & Back Panel Overview
Front Panel
Indicators
A total of up to 6 separate LED indicators are included on the front panel of the 9200. The
following details the type of indication they represent.

Quantum Logo Indicates the unit is powered on and system status.

Channel A-D Indicates which channels are in the enabled state.

Active Indicates the unit is armed and/or channels are
actively pulsing (or waiting to be triggered).
Run/Stop/Power Button
The Run/Stop button serves the dual purpose of both powering on/off the unit as well as
enabling/disabling the system output. It should be noted that only a short press is needed to
both turn on and arm/disarm the unit. The button needs to be pressed and held for
approximately 1 second in order to power off the unit. In the power off sequence the active
settings are saved and reloaded when the unit is power back on.
The following image represents the front panel of a 4 channel 9214. It should be noted th at
the 2 channel 9212 does not have channel C or D indicators.
Figure 3.1 - 9214 Front Panel