Quantum Composers 9200 Series - Manual (Page 40)

Page 40 9200 Manual Version 1.6 | Quantum Composers
IEEE 488.2 Common Commands
Command: Parameter Range: Notes:
*IDN ?
Query only. Returns model, serial number, firmware version, and FPGA
version numbers.
*RCL 0 - 6 Recalls configuration from specified storage location
*RST RESET. Resets parameters, same as *RCL 0
*SAV 1 - 6 Saves current parameters to desired storage location
*SER ? Serial number query.
*TRG Creates a soft trigger input.
*ARM
Resets all channel counters simultaneously when the channels are in either
single shot or burst mode.
*Note: The system must be in continuous mode (this command is functionally
the same as pressing the Run/Stop button).