Quantum Composers 9200 Series - Manual (Page 43)

9200 Manual Version 1.6 | Quantum Composers Page 43
Output Module
Output Impedance - 50 - Ohms
Output Level
3.3 – 5.0 VDC into ≥ 1K ohm
1.7
– 2.5 VDC into 50 ohm
Resolution - 20 - mV
Output Current
5mA typical into 1K ohm
50mA typical into 50 ohm
Rise Time (10% - 90%)
< 2ns typical @ 5V (High Imp)
< 1ns typical @ 2.5V (50 ohm)
Slew Rate 2 - - V/ns
Overshoot < 100mV + 10% of pulse amplitude
Communications
USB Standard – USB 2.0
BlueTooth Optional
Class Class II Radio
Output Transmitter Gain - 4 - dBm
Transmitter Sensitivity - -80 - dBm
Transmitting Range - 20 - Meters
Baud Rate - 115200 - bps
General
Dimensions 7.125” x 5.1” x 1.5” (18.1 x 13 x 3.8 cm)
Weight - 1 - lbs
Power
Voltage Input 4.75 - 5.25 VDC
Current Input (1) 210 (2) 230 (3) 470 mA
Fuse
Internal current sense circuit incorporated. No external
fuse is provided.
Memory - 6 - Bins
Operation Temperature 0 - 40 Celsius
Storage Temperature -40 - 70 Celsius
(1)
Minimum current input is defined as the current consumed when the unit is in idle state (i.e. not pulsing) with
Bluetooth disabled.
(2)
Typical current input is defined as the current consumed when all 4 channels are pulsing into high impedance
loads at 5V, rate of 10Hz, 50% duty cycle, and with the Bluetooth option disabled.
(3)
Maximum current input is defined as the current consumed when all 4 channels are pulsing into 50 Ohm loads at
5V, active low mode, and with the Bluetooth option enabled.