Quantum Composers 9200 Series - Manual (Page 41)

9200 Manual Version 1.6 | Quantum Composers Page 41
9. Appendix A – Specifications
9200 Specifications

Indoor use in dry conditions only

Ordinary Protection: This product is NOT protected against harmful ingress of moisture.

Class III Equipment (external 5Vdc SELV power source)

USB power draw from the USB Host Port: 5Vdc 0.5A

Pollution Degree II (Micro-Ambient Pollution restricted to temporary conductivity caused
by condensation).

External Power Supply: Installation (Overvoltage) Category II for transient over-voltages.

Maximum Relative Humidity: 0-80% relative humidity, non-condensing

Maximum altitude: 0 to 2000m (6562 ft.)

Accessories: USB cable

Cleaning Instructions: Light dusting with cloth damp with water and/or usage of
compressed air is all that is needed.
*NOTE: See Appendix C for 9200 Plus specifications.
9200 Specifications MIN TYP MAX UNIT
I/O Configuration
Model/Output
9212 – 2 Independent Channels
9214
– 4 Independent Channels
Input 1 Selectable Trigger/Gate Input
Internal Rate Generator
Rate (T
0
Period) 0.001 - 5,000,000 Hz
Resolution - 10 - ns
Accuracy 5ns + (0.0001 x Period)
T
0
Period Jitter - - 500 ps(RMS)
Time Base 100MHz, Low Jitter PLL
Oscillator 50MHz, 50ppm Crystal Oscillator
System Modes Single, Continuous, Burst, Duty Cycle
Burst Mode 1 - 1,000,000 Pulses
Duty Cycle Mode 1 - 1,000,000 Pulses
Pulse Control Modes Internal Rate Generator, External Trigger/Gate