Quantum Composers 9200 Series - Manual (Page 11)

9200 Manual Version 1.6 | Quantum Composers Page 11
Navigating the 9200
Primary control of the 9200 is carried out either through the 9200 application (see 9200
application Menus) or through unit specific commands using a terminal program via USB (see
Programming the 9200). Communication through Bluetooth is also available as an upgrade
which will allow the same user interfaces as USB. The Run/Stop buttons found on either side
of the 9200 serve the purpose of both power on/off as well as enablin g/disabling the system
output.
Enabling System Output
The Run/Stop button found on both the front and back panel of the 9200 is used to arm the
system. With external trigger disabled, the button will arm and start pulse output. With
external trigger enabled, the button will arm the pulse generator. Pulse outputs then starts
after the first valid trigger input. Pressing the Run/Stop button a second time disables the
pulse generator.