Quantum Composers 9200 Series - Manual (Page 39)

9200 Manual Version 1.6 | Quantum Composers Page 39
:CGATe DIS / LOW / HIGH
Channel Gate Subsystem.
Contains commands to
control using the gate input to
control the output channel.
Command Keyword 1 Keyword 2 Keyword 3 Parameter Range Notes
:SYSTem
Command to change the
units’ system settings.
:STATe ? Query Only Command
:BEEPer
Command to change the
units’ beeper settings.
:STATe 0/1 or OFF/ON
Command to turn on or off the
systems' beeper.
:COMMunicate
Command to set the
communication settings.
:USB
:ECHo 0/1 or OFF/ON
Command to Enable/Disable
the echo function on the RS-
232 interface. The Echo
function will cause the unit to
repeat the command received
to the PC.
:BLUEtooth
:ENable 0/1 or OFF/ON
Turns on/off Bluetooth
module. Disables Bluetooth
transmitter. This state is not
saved and will default to on
when power is cycled.
*Note: Command not
available on units without
Bluetooth option.
:ECHo 0/1 or OFF/ON
Command to enable/disable
the echo function on the
Bluetooth interface. The Echo
function will cause the unit to
repeat the command received
to the PC.
*Note: Command not
available on units without
Bluetooth option.
:MAC ?
Returns the Bluetooth MAC
address.
:AUTorun 0/1 or OFF/ON
When the unit is powered up,
if this command is enabled,
the unit will start pulsing
automatically.
:VERSion ?
Query only. Returns SCPI
version number in the form
YYYY.V for ex. 1999.0