Quantum Composers 9200 Series - Manual (Page 42)

Page 42 9200 Manual Version 1.6 | Quantum Composers
Channel Timing Generator
Pulse Width Range 10n - 1,000 s
Width Accuracy 10ns + [0.0001 x (width + delay)]
Width Resolution - 10 - ns
Pulse Delay Range -1,000 - 1,000 s
Delay Accuracy 10ns + (0.0001 x delay)
Delay Resolution - 10 - ns
Jitter (Channel to Channel) - - 250 ps(RMS)
Multiplexer
Any/all channels may be OR’d to any/all outputs
Time Base Same as internal rate generator
Channel Modes Single Shot, Normal, Burst, Duty Cycle
Burst Mode 1 - 1,000,000 Pulses
Duty Cycle Mode 1 - 1,000,000 Pulses
Wait Function 0 - 1,000,000 Pulses
Control Modes
Internally triggered or externally gated. Each channel
may be independently set to either mode.
System External Trigger/Gate Input
Trigger Input Function
System will generate a single T
0
pulse for every
external trigger pulse
. See “External Input Overview”
for more information.
Trigger Edge Rising / Falling
Gate Input Function
External gate input controls the output of
the unit
Gate Input Modes
System Gate (Pulse Inhibit)
Channel Gate (Output Inhibit)
See External Trigger/Gate section for
more information
Gate Polarity Active High / Active Low
Trigger/Gate Input Module
Threshold 0.2 - 15 V
Max Input Voltage - - 30 V
Resolution - 10 - mV
Trigger Accuracy ± 3% of Threshold Voltage
Impedance 5.3K ohm + 40pF
Trigger Rate DC - 5 MHz
Trigger Input Jitter - - 20 ns(RMS)
Trigger Input Insertion Delay
- - 150 ns
Trigger Input Minimum Pulse Width
20 - - ns
Pulse Inhibit Delay - - 150 ns
Output Inhibit Delay - - 100 ns