Orion System VAV II Controller v.1 - Manual (Page 75)

VAV/CAV/MUA Operator Interface SD
INDEX
75
S
SAT Reset Offset.........32
SAT Sensor Calibration.........49
Schedule
Button.........10 , 16
Mode.........64
Override.........14
, 15 , 22 , 23
Time & Date.........11 , 17
Scheduling , Controller.........14 , 22
Screens
Air to Air Heat Pump Control.........27
Alarm Limits.........47
Broadcast Fan & Heat Status.........28
Broadcast Humidity Reading.........28
, 44
Broadcast Internal Schedule.........28
Broadcast Outdoor Temperature.........27
, 43
Broadcast Supply Temperature.........28
Broadcast Time Clock to All Loop Units.........27
Broadcast VAV Boxes Force to Fixed.........28
Broadcast VAV Boxes Force to Max.........28
Building Pressure Control.........26
Building Pressure Setpoint.........34
CO
2
Protection Limit Setpoint.........35
CO
2
Sensor Installed.........27
CO
2
Sensor Maximum Reading.........27
Communications Screen.........12 , 18
Confi guration Screens.........42
Constant Volume Mode Active.........25
Controlling Sensor.........25
Cool/Heat Stage Delays.........37
, 48
Cutoff Temperature Setpoints.........33
Dehumidifi cation Control Screens.........26
, 43
Dewpoint Reset.........48
Economizer Control.........26
Economizer Maximum Position if High CO
2
Level
Setpoint.........35
Economizer Minimum Position & Control Rate
Setpoints.........34
Economizer OAT/WB Enable Setpoint.........33
Economizer Overrides.........65
Enthalpy Staging - Deadband and Hysteresis.........46
Exhaust VFD Override.........65
External Heat Output Range.........43
External Heat, Reverse Acting.........43
Heat Delay During Dehumidifi cation.........46
Heat In Dehumidify Control.........43
Heating/Cooling Supply Control Deadband.........32
Heat Pump Auxiliary Heating Delay.........36
Holiday Schedule.........15
, 23
HVAC Mode Select Deadband Setpoints.........32
HVAC Mode Sensor Slide Offset Setpoint.........36
, 49
HVAC Mode Setpoints.........31
HVAC Schedule Setpoint.........35
, 49
If External Heat, Reverse Acting.........43
Initialization for Modular Service Tool.........11
, 17
Internal Schedule Optimal Start Soak Multiplier
Setpoint.........36
Loop Search Screen.........20
Low Ambient Protection.........33
Mechanical Heat/Cool Failure Time Period Setpoints.........35
MiniLink PD Confi guration.........63
Mod Heating Override.........65
Morning Warm Up Temp Setpoint.........32
MUA II Confi guration Screens.........43
Optimal Start Soak Multiplier.........36
Outdoor Air Humidity Sensor Installed.........26
, 43
Outdoor Air Lockouts.........32
Outputs Force Screen.........65
Overrides Screen.........13
, 21
Proof of Flow Switch Installed.........26 , 43
Push-Button Override Duration Setpoint.........36 , 48
Reheat - Dewpoint Control Setpoint.........46
Relay Confi guration Screens.........29
, 44
Relay Overrides.........65
Relief Setpoint.........34
Reset Cooling Mode Supply Setpoint.........27
Reverse Acting Building Pressure Control.........26
SAT Cooling Setpoints.........32
SAT Cool Reset.........34
SAT Heating Setpoint.........32
SAT High Reset.........34
Schedule Override.........15
, 23
Sensor Calibration for OAT.........37
Sensor Calibration for SAT & OAT.........49
Sensor Calibration for SPC & SAT & RAT.........37
Sensor Calibration Reset for SPC.........49
Sensor Slide Offset.........36
Set Time & Date Screens.........11
, 17
Space Sensor Overrides Screen.........21
Staging Deadbands.........46
Static Setpoint, Deadband & Control Rate Setpoints.........34
Supply Air Alarm.........47
Supply Air Temperature Reset.........47
Supply Air Temperature Setpoint.........46
Supply Control Deadband.........32
Supply Fan Starting Delay Timer Setpoint.........35
, 49
Supply Fan VFD Percentage.........33
Supply VFD Override.........65
Unit Selection Screens.........25
, 31 , 38 , 42
, 45 , 50 , 53 , 56 , 63 , 65 , 66
Unoccupied Cooling & Heating Setbacks Setpoints.........31
Unoccupied Deadbands.........46
VAV/CAV Confi guration Screens.........24
, 25
VAV/Zone Box Confi guration.........53
VAV/Zone Confi guration.........53
VAV/Zone Controller Setpoints.........56
VAV/Zone Damper Operation.........53
VAV/Zone Status.........60
Week Schedules.........14
, 22
Search
For Loops.........20
For Overrides.........21
Selection Buttons
Defi ned.........10 , 16