Nortec ME Control - Manual (Page 7)

7 For your safety
2 For your safety
General
Every person working with the Nortec ME Control must have read and understood the operation manual
of the Nortec ME Control before carrying out any work.
Knowing and understanding the contents of the operation manual is a basic requirement for protecting
the personnel against any kind of danger, to prevent faulty operation, and to operate the unit safely and
correctly.
All ideograms, signs and markings applied to the components of the Nortec ME Control must be observed
and kept in readable state.
Qualification of personnel
All work described in this operation manual
may only be carried out by specialists who are well
trained and adequately qualified and are authorized by the customer.
For safety and warranty reasons any action beyond the scope of this manual must be carried out only
by qualified personnel authorised by the manufacturer.
It is assumed that all persons working with the Nortec ME Control are familiar and comply with the ap-
propriate local regulations on work safety and the prevention of accidents.
The Nortec ME Control may not be used by persons (including children) with reduced physical, sensory
or mental abilities or persons with lacking experience and/or knowledge, unless they are supervised by
a person responsible for their safety or they received instructions on how to operate the system.
Children must be supervised to make sure that they do not play with the Nortec ME Control.
Intended use
The Nortec ME Control is intended exclusively for
air humidification and air cooling in AHU's or air
ducts within the specified operating conditions. Any other type of application, without the written consent
of the manufacturer, is considered as not conforming with the intended purpose and may lead to the
Nortec ME Control becoming dangerous.
Operation of the equipment in the intended manner requires that all the information contained in this
operation manual are observed (in particular the safety instructions).