Nortec ME Control - Manual (Page 4)

4 Contents
5.5 Service functions 40
5.5.1 Accessing the “Service” submenu 40
5.5.2 Performing maintenance functions – “Service” submenu 40
5.5.2.1 Input diagnostic functions – “Input Diagnostics” submenu 44
5.5.2.2 Output diagnostic functions – “Output Diagnostics” submenu 47
5.5.2.3 Relay diagnostic functions – “Relay Diagnostics” submenu 48
5.6 Administration settings 49
5.6.1 Accessing “Administrator” submenu 49
5.6.2 Administration settings – “Administrator” submenu 49
6 Maintenance 51
6.1 Important notes on maintenance 51
6.2 Maintenance intervals 52
6.3 Maintenance guide 52
6.4 Dismantling and installation of components for maintenance 54
6.4.1 Dismantling and installation of the evaporative module 54
6.5 Consumables guide 55
6.6 Health and safety requirements 55
6.7 Routine water sampling and testing 56
6.8 Cleaning and disinfection 57
6.9 Cleaning and disinfection method statement 58
6.10 Resetting the maintenance indication on Nortec ME Control 60
6.11 Performing software updates 61
7 Fault elimination 62
7.1 Fault indication on Nortec ME Control control unit 62
7.2 Malfunction list 63
7.3 Saving fault and service histories to a USB memory stick 68
7.4 Malfunctions without indication 68
7.5 Notes on fault elimination 69
7.6 Replacing the fuses and backup battery in the control unit 70
7.7 Resetting the fault status on Nortec ME Control 71
8 Taking out of service/Disposal 72
8.1 Taking out of service 72
8.2 Disposal/Recycling 72
9 Product specifications 73
9.1 Technical data 73
10 Appendix 74
10.1 Wiring diagram Nortec ME Control 74