Nortec ME Control - Manual (Page 3)

3 Contents
Contents
1 Introduction 5
1.1 General 5
1.2 Notes on the operation manual 5
2 For your safety 7
3 Product Overview 10
3.1 Model overview 10
3.2 Product designation / Which model do you have 11
3.3 Construction of the system components 12
3.3.1 Construction of the evaporative module 12
3.3.2 Construction of the hydraulic module 13
3.4 System overviews / Functional description 14
3.4.1 Typical system Nortec ME Control (internally mounted) 14
3.4.2 Typical system Nortec ME Control (externally mounted) 15
4 Operation 18
4.1 Important notes on operation 18
4.2 Initial commissioning 19
4.3 Display and operating elements 21
4.4 Start up for daily operation 22
4.5 Notes on operation 23
4.5.1 Important notes on operation 23
4.5.2 Remote operating and fault indication 23
4.5.3 Recommended regular checks during operation 23
4.5.4 Manual draining of the water tank 24
4.5.5 Performing a matrix wash over 25
4.6 Decommissioning the system 26
5 Operating the Nortec ME control software 27
5.1 Standard operating display 27
5.1.1 Operating status indication 28
5.1.2 Maintenance and malfunction indications 29
5.2 Navigating/operating the Nortec ME control software 30
5.3 Information functions 31
5.3.1 Accessing support information 31
5.3.2 Accessing system information 31
5.4 Configuration 34
5.4.1 Accessing the “Configuration” submenu 34
5.4.2 Configuring dilution and drain cycle functions – “Features” submenu 34
5.4.3 Control settings – “Control Settings” submenu 36
5.4.4 Basic settings – “General” submenu 38
5.4.5 Communication settings – “Communication” submenu 39