Nortec ME Control - Manual (Page 27)

27 Operating the Nortec ME control software
5 Operating the Nortec ME control software
5.1 Standard operating display
After switching on the control unit and the automatic system test the control unit is in normal operating
mode and the standard operating display is shown.
Note: the appearance of the standard operating display depends on the current operating status and
the configuration of the humidity/temperature regulation of the system and can deviate from the display
shown below.
The standard operating display is structured as follows:
Current operating status
(see chapter 5.1.1 – Operating status indication)
Humidity/temperature regulation information
Maintenance/malfunctions indication field
(see chapter 5.1.2 – Maintenance and malfunction indications)
Access Help screen
Drain tank
Access system information
Access main menu
Fig. 9: Standard operating display