Nortec MH Series - Manual (Page 69)

Maintenance and Servicing | 66
Mist Eliminator Removal
Figure 48: Mist Eliminator Removal
Media Box Removal
Figure 49: Media Box Removal
Lift slightly
and pull
out from
slots.
Air
Flow
Media Box
Tab (4/box)
 Starting with the top
row lift media boxes so
that tabs engaged in
support members are
free.
 Then pull boxes back
and out.
 To install reverse
procedure starting
installation with the
bottom row.
 If a mist eliminator
(optional) is present
then remove it by lifting
slightly and pulling
back to slide support
pins out of slots in side
panels.
 Move the mist
eliminator out of the
way to provide access
to the media boxes.