Nortec MH Series - Manual (Page 59)

Operation | 56
Modbus Menu
From the User Menu highlight Modbus and press Set. The Modbus menu allows you to
configure the MHTC controller to communicate on your Modbus network by setting the Modbus
address, parity, and communication timeout.
Modbus Address
Sets the Modbus address that the
MHTC controller will use for
communication on a Modbus
network. Press up/down arrow keys
to change value and press Set to
accept.
Parity
Sets the parity bit for Modbus
communication to None, Odd, or
Even. Highlight the required setting
and press Set to select.
Timeout
Sets the length of time the controller
will wait for Modbus data before a
communication timeout is
generated.
Modbus Addr.
1
1
Esc Set
Modbus
Modbus Addr.
: 1
Parity : None
Timeout : 5s
Esc Set
Modbus Addr. : 1